Powered By Blogger

Sunday 24 December 2017

Seasons Greetings

Merry Christmas ...;b

Saturday 23 September 2017

Back

Hi
Yes I know I said I'd try harder blog a bit more..
Life seems to get in the way, anyhoo I have been tinkering around.
And rattled up this chair I showed some prep for this a while back.
So here it is comlete with copper patches...;b


Sunday 20 August 2017

I know I know

Yes I should get my finger out and post more..
Made a little hat and coat rack and a couple of stools.
This is the start of a chair you'll see more of this. Hope all you readers and followers are all doing well....
I'll try to do better...;b



Tuesday 13 June 2017

Thoroughly

Here is the resin table sanded to 240 grit then finished with boiled linseed oil. I thoroughly enjoyed making this..
Take a look..;b




Sunday 28 May 2017

A Lot Going On

Hi Folks
I started cutting out housings for warped boards that will become table legs a few posts back.
The table is glued up now with three colours of resin in the small holes and fissures in this Cat's Paw Oak , it has a lot going on in it this little table. It will have a single bent hazel brace thats currently in traction.


Here's where I'm at, just making the timber pop with Boiled Linseed Oil...;b

Sunday 21 May 2017

Buckled Burr

This has become one of my all time favourites. With rich dark hue of swirling buckled burr...;b



Sunday 14 May 2017

Stools With Copper

I finished off these stools today. They have a little of the copper resin filling a few gaps.
Maybe you can catch a glimpse in the sunlight..;b


Saturday 13 May 2017

Northmen Guild's Code of Ethics


Many a true word said..;b
Thanks to the original uploader!

Monday 1 May 2017

Treasure and Cutting Housings

Well my experimenting went a stage further to mixing polyester resin and adding brass filings,and a little green colour in some of the shakes and voids in this oak. If you enlarge these two pictures, you might just see.

I also got the housings cut, to let the table leg boards into the base. With marking knife, mallet, chisel and a little bullnose plane. I set to work removing the material.

A little trip to the carboot sale (flea market) Yielded me some treasure for less than £10.00.
A very old first aid kit, with some old dressings. Along with an almost new Leatherman Charge.





Back in the workshop feeling inspired..;b

Saturday 15 April 2017

Experimenting

Hi
I've got a table to make for my cousin. I'm using the oak I was preparing a few weeks back .
It has several shakes which I'm thinking about patching with some copper dutchmen, which I'm experimenting with at the moment.
As you will see in the pictures...:b


Saturday 1 April 2017

Inspired

Yes I know it's been a while.
Maybe some of you have ran off understandably so!
The long winter is over and I feel inspired once more, So I took this oak out to see it in the sunlight and start preparing it for future projects.;b